Minicom Advanced Systems Remote Power Switch Manual de usuario descargar pdf (Pagina 5)

REMOTE POWER SWITCH

SNMP card LEDs

Yellow Red Green Status

Off Off On Power on

Flashing On On System initializing

On Off On Normal operation

On Flashing On Connecting to incorrect device

Flashing Flashing On Firmware updating

LAN Port LED

Green

On: Internet speed is 100M

Flashing: Data transmitting

Yellow

On: Internet speed is 10M

Flashing: Data transmitting

SNMP card Reset button

The Reset button erases all passwords, but does not reset other parameters.

To reset the SNMP card:

1. Press and hold the reset key.

2. Turn on the power source of the SNMP card

3. Wait 30 seconds. All passwords are erased, usernames are unaffected.

6. Operating the RPS manually

You can operate the RPS manually using the manual buttons on the front panel.

See Figure 1.

When a power outlet is in manual mode, you cannot operate it via the Web. When

the green LED is off, the outlet is in manual mode. When it is on the outlet is in

Web mode. To change from manual mode to Web mode and vice versa, press and

hold the manual button for 3 seconds. The green Led flashes and the mode is

changed.

In manual mode simply press the manual button to switch the outlet on or off. The

red LED on indicates the socket is powered on. The red LED off indicates the

socket is powered off.

1 2 3 4 5 6 7 8 9 10 ... 23 24

Sin comentarios

Minicom Advanced Systems Remote Power Switch Manual de usuario Pagina 5