Minicom Advanced Systems IP Control Guía de usuario descargar pdf (Pagina 8)

SMART IP EXTENDER

Internal Reset/Power Option - This option applies to remote systems where no

IPMI Version 1.5 is available. The optional bracket is mounted in a free PCI/AGP

slot. Main board pins for reset and power on/off have to be connected to the bracket.

With this option it is possible to perform a remote reset, power cycle, and power

on/off.

External Power Switch Option - When there is neither a IPMI V1.5 option

available or the ability to place a bracket in the remote system, an external power

switch box can switch the power on and off.

IPMI Version 1.5 - defines a serial connection to access certain system parameters

and perform system actions like powering down or a hard reset. Modern server

systems, supporting the IPMI V1.5 specification, provide a mode where the

externally available COM2 serial connection can be configured as a system

management port (sometimes called an emergency management port). IP Extender

may use this port in order to enable remote system management operations.

5. System components

• 1 IP Extender Extender box

• Cables (illustrated below)

• Power cord

• Marketing & Documentation CD

• Optional IPMI Option. This is a serial cable for connecting the IP Extender

and an IPMI V1.5 compliant serial management port on the remote system.

• Optional Internal Reset/Power Option. The internal reset/power option (see

Figure 2.2) consists of a PC bracket with a Sub-D 9 jack on the outside and

4x2 pin connector in the inner side. The Sub-D 9 jack is connected to the IP

Extender Serial Port 2. The internal 4x2 pin connector allows to connect the

reset and power on/off switching signals of the main board to IP Extender.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 70 71

Sin comentarios

Minicom Advanced Systems IP Control Guía de usuario Pagina 8