Minicom-advanced-systems Minicom Smart 116 IP Manual de usuario descargar pdf (Pagina 18)

SMART 108/116 IP

Notes

Firewall or router security access list must enable inbound communication through

the selected TCP ports for the Smart 108/116 IP’s IP address. (Default TCP port is

900, default web interface TCP port is 443).

For Client computer access from a secured LAN, the selected ports should be open

for outbound communication.

12.1 LAN

Under LAN in Figure 13, is the following:

Enable DHCP – When a DHCP server is active on the same network to which

Smart 108/116 IP is connected, DHCP provides automatic IP assignment.

When DHCP is disabled – (Recommended) – You can assign a fixed IP address to

the Smart 108/116 IP.

Consult your Network Administrator regarding the use of the DHCP. Note! Where

you have access to the server – your configured (or default) Smart 108/116 IP

device name will appear on the DHCP server’s interface, making it easy to locate.

When DHCP is disabled, enter the IP Address, Subnet Mask, and Default

Gateway for LAN 1, as given by your Network Administrator.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 61 62

Sin comentarios

Minicom-advanced-systems Minicom Smart 116 IP Manual de usuario Pagina 18